Shanghai Minggong Heavy Equipment Co., Ltd

Single stage Hammer Crusher

    This hammer crusher is applicable for both dry and wet crushing. Hammer crusher is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment. The compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%.
    The hammer crusher is one of the main equipment for intermediate and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio and even product graininess.

Main Technical Parameters of Hammer Crusher :

Model	Max feed size(mm)	Rotor diameter mm	Rotor Length mm	Residual on the screen ≤15%	output (t/h)	Power(kw)	Weight (t) ( not include motor)
PCF-1412	600×600×900	1420	1200	≤25	80-120	220	23.5
PCF-1616	800×800×1000	1650	1630	≤25	180-220	315-355	43.3
PCF-1616 Ⅱ
PCF-1618	≤ 1m 3	1650	1830	≤25	240-280	400	49.5
PCF-1818	900×900×1000	1850	1830	≤25	300-350	560	70
PCF-2018	<1m 3	2020	1802	≤25	350-500	630-710	89
PCF-2018 Ⅱ	1000×1000×1000			≤25-75	350-450	630-700
PCF-2022	1000×1000×1500	2010	2230	≤30占90%	600-800	800	111
PCF-2022 Ⅱ	1000×1000×1500	2010	2230	≤70占90%	600-800	800	130
PCF-2022 Ⅲ	1000×1000×1500			≤80占90%	700-800	800
2PCF-1818	1000×1200×1500	1850	1830	≤75	1000	560	119
2PCF-2030	1000×1000×1500	2020	2230	≤25	700-900	800×2	142